11
USING THE STAND
The included tilting stand comes installed out of the box. To use the stand, pull up on the
indicated switch to unlock the tilt, allowing it to be adjusted to the desired angle between
20°-80°. If you want to use a desk or wall mount, remove the installed stand by removing
the four screws that fix it in place, then use the screws to attach the monitor to the mount.
CHARGING THE PEN
The included pen stylus features a built-in rechargeable battery that gives up to 350 hours
of continuous operation. The pen should be fully charged before first use and should be
charged at least once every three months to keep the battery fresh and capable of holding
a full charge. To charge the pen, plug the DC barrel connector on the included charging
cable into the top of the pen, then plug the USB connector into a USB power source, such
as a USB port on your computer or a USB wall charger. The LED indicator on the pen will
glow red while charging is in progress and will extinguish when charging is complete.
When the LED indicator glows orange dusring use, the battery is low and should be
recharged immediately.
