10
+:
When the OSD menu is displayed, press the + button to move the highlight to the
right or up. When an option is being edited in the OSD menu system, press the +
button to increase the value.
MENU: When the OSD menu is not displayed, press the MENU button to display the OSD
menu. When the OSD menu is displayed, press the MENU button to select the
highlighted submenu or to select an entry for editing. While editing an OSD menu
entry, press the MENU button to save any changes made.
POWER: Press the POWER button to the display on or off.
ASSEMBLING THE AC POWER ADAPTER
The AC power adapter for this Pen Display uses a detachable plug, allowing it to be
customized for non-US markets. Before using the adapter, you must assemble it by sliding
the NEMA 1-15 plug onto the top of the adapter, as shown in the diagram below. If you
ever need to remove the plug, push the locking switch back, then slide the plug off the
adapter.
