21
Command
Function
Feedback Example
Save[Y].
Saves the current connection settings to
the preset command[Y].
(Y=0~9)
Save to FY
Recall[Y].
Loads the connection settings saved to
preset command [Y].
(Y=0~9)
Recall From FY
Clear[Y].
Clears the connection settings saved to
the preset command [Y].
(Y=0~9)
Clear FY
PWON.
Enables normal working mode.
PWON
PWOFF.
Enters standby mode and cuts off power
to the HDBaseT™ receivers.
PWOFF
STANDBY.
Enters standby mode, but does not cut
off power to the HDBaseT™ receivers.
STANDBY
/%[Y]/[X]:[Z].
HDCP management command.
[Y] is for specifying input (I) or output (O).
[X] is for the port number (1~5, where 5
represents all ports).
[Z] is for the compliance status, where 1
sets the port to HDCP compliant and 0
sets the port to HDCP not compliant.
/%[Y]/[X]:[Z].
DigitAudioON[X].
Enables HDMI® audio output for port [X].
(X=1~5, where 5 represents all ports)
DigitAudio ON with [X]
DigitAudioOFF[X].
Disables HDMI audio output for port [X].
(X=1~5, where 5 represents all ports)
DigitAudio OFF with
[X]