6
8.
HDMI IN Port: HDMI® port for connecting the HDMI cable from the video source
device.
9.
HDBT OUT Jack: RJ45 jack for connecting the Ethernet cable to the receiver.
10.
ETHERNET Jacks: RJ45 jacks for connecting to an existing Ethernet network and/or
devices.
11.
DC IN Jack: DC barrel connector for connecting the included AC power adapter.
Receiver
1.
RS232 MODE Switch: Selects the RS232 mode. The CTRL position is the normal
operating mode where RS232 data is passed back and forth with the transmitter.
The two UPDATE positions are for updating the receiver's firmware using one of
two methods. See the
FIRMWARE UPDATE section for details.
2.
LINK LED Indicator: The LED illuminates green when there is a valid HDBaseT™
connection with the receiver. The LED is off when there is no valid link.
3.
HDCP LED Indicator: The LED illuminates green when there is HDMI® video traffic
with HDCP. It will blink green when there is HDMI video traffic without HDCP. It will
be off when there is no HDMI video traffic.
4.
POWER LED Indicator: The LED illuminates red when power is applied and is off
when no power is present.