7
12.
To adjust the tilt, first use the included 5mm Hex Wrench (H) to slightly loosen the
two screws on each side of the mounting bracket, adjust the tilt as desired, then
tighten the screws to secure the bracket in place.
13.
To adjust the monitor angles, use the included 5mm Hex Wrench (H) to slightly
loosen the two screws at the base of the arms, adjust the angle, then tighten the
screws to secure the arms in place.
14.
Install the cables and use the included cable management clips to keep hold the
cables neatly in place.
