6
DIRECT CONNECTION
If you cannot use a Bluetooth connection, you can use the speaker for audio playback by
connecting it to your device using a 3.5mm stereo audio cable (not included). Perform the
following steps to make a direct connection:
1.
Plug one end of a 3.5mm stereo audio cable (not
included) into the AUX port (7) on the speaker.
2.
Plug the other end of the cable into the headphone
output jack on your audio device.
Note that when using a direct connection, the volume
control buttons on the speaker are non-operative. Use
the volume controls on your audio device to control the volume level.
TELEPHONE CALLS
If you are using a Bluetooth connection with your phone, the speaker can be used as a
speakerphone for incoming and outgoing calls.
Incoming Calls
When you receive an incoming call, audio playback will automatically pause. You will hear
your phone's normal ringtone and the speaker will beep to indicate that an incoming call
has been received.
To answer the call, press the Multifunction button (2) once.
To reject the call, press and hold the Multifunction button (2) for about 2
seconds.
Once the call has been completed, press the Multifunction button (2) once to
terminate the call. Audio playback will automatically resume.
