5
BLUETOOTH PAIRING
Perform the following steps to pair the speaker with your phone or other Bluetooth
device:
1.
Slide the Power switch (5) to the ON position. The speaker will beep and the LED
indicator will begin to blink blue, indicating that the speaker is in Bluetooth Pairing
Mode.
Note: If the speaker is already paired to a device, the LED will instead glow blue
continuously. To unpair the speaker from the other device, press and hold the
Multifunction button (2) for about 3 seconds. The speaker will beep and the LED
will begin blinking blue, indicating that the speaker is ready to be paired with
another device.
2.
Open the Bluetooth settings on your device and search for nearby Bluetooth
devices.
3.
Locate and select the MP-13264 entry. If prompted for a passcode, enter 0000 (four
zeroes). The speaker will beep and the LED indicator will stop blinking and begin to
glow blue continuously.
PAIRING WITH ANOTHER DEVICE
Although the speaker can be paired with multiple devices, it can only be paired with one at
a time. Perform the following steps to pair the speaker with a different device:
1.
Slide the Power switch (5) to the ON position.
2.
Press and hold the Multifunction button (2) for about 3 seconds. The speaker will
beep and the LED will begin blinking blue, indicating that the speaker is ready to be
paired with another device.
3.
Follow the instructions in the
Bluetooth Pairing section above.
