OPERATION
1. Use the Channel Selection switch on the Transmitter to select one of the four wireless
channels. Set the Channel Selection switch on the Receiver to the same channel.
Transmitter Receiver
Channel selection button
must be set to the same channel
on both the transmitter & receiver.
2. Pull the antenna out of the base of the Transmitter until the face is vertical. Rotate the
antenna until the side with the dot (the inside part) is facing the location of the Receiver
unit.
Caution! The antenna does not rotate 360 degrees. Do not force it past any
resistance.
3. Pull the antenna out of the base of the Receiver until the face is vertical. Rotate the
antenna until the side with the dot (the inside part) is facing the location of the Transmitter
unit.
Transmitter Receiver
Side with round dot
Turn the side with round dot
face-to-face to obtain the
best performance.
7
