monolith MONOLIGHTER, Руководство пользователя

Страница: 7 / 9

OPERATING INSTRUCTIONS
Switching on
Using your thumb, push the On/Off switch (1) to-
wards the handle and hold. After a few minutes the
device will have reached operating temperature.
Switching off
Release the On/Off switch (1). The switch will slide
back into the starting position and switch itself off.
Light the barbecue
A. Always make a pile of the coal or briquettes.
B. Touch the pile of coal with the fire starter.
C. Draw back the fire starter a little bit when sparks
appear (after 10-20 seconds).
D. Continue to point the fire starter in the same
direction for at least 60 seconds.
Light the fireplace
A. Build a pile of small logs or branches.
B. Touch with the fire starter (or put a small piece of
newspaper between the logs).
C. Draw back the fire starter when flames appear.
D. Continue pointing the fire starter in the
same direction.
MAINTENANCE AND CLEANING
If necessary, please use dry cloth to clean your
appliance after unplugging and cooling down. The
appliance is not intended to be left outdoors, please
store dry and indoors only.
WARNING!
Pull the fire starter slightly backwards when
sparks or glow appear. Fire starter can not stay in
fire. Otherwise, the metal cover of the nozzle will
be melted.
Charcoal comes in many forms. There are briquettes,
lump charcoal, heat beads, hard wood etc. The
ignition time will differ depending on material and
production quality.
If we start with charcoal it is mostly made from wood.
Much of the charcoal on the market is poor quality,
often made from fast growing trees and often chilled
with water to speed production. Poor quality char-
coal can spark when ignited (which is not dangerous
but perhaps not so fun).
Charcoal that is produced from hard wood however
will take longer to ignite and get ready to use. Good
quality charcoal lights quickly without sparks, is ready
to use in a couple of minutes with the MONO Lighter
and burns during a longer period.
Briquettes are pulverized charcoal that’s compressed
with corn starch to bind the charcoal. Briquettes
produce smoke (it’s the starch) but ordinary char-
coal is smokeless. Some producers compress their
briquettes very hard which makes them burn much
longer (up to four hours), but on the other hand also
takes longer time to light and get ready for cooking.
Only use such briquettes when you need to barbecue
for many hours.
MONO LIGHTER
USER MANUAL
DE // EN
Lesen Sie dieses Benutzerhandbuch
vor der Verwendung des Geräts auf-
merksam durch, um eine sichere
und sachgemäße Verwendung zu
gewährleisten.
SICHERHEITSHINWEISE
1. Dieses Produkt ist nicht für industrielle oder
gewerbliche Anwendungen bestimmt. Verwenden
Sie das Gerät nicht für Anwendungen, für die es
nicht ausgelegt ist.
2. Dieses Produkt ist nicht für die Verwendung durch
Kleinkinder oder andere Personen ohne Aufsicht von
Erwachsenen vorgesehen. Kleinkinder sollten be-
aufsichtigt werden, um sicherzustellen, dass sie
nicht mit dem Produkt spielen.
3. Kinder und andere Besucher sollten vom Arbeits-
bereich ferngehalten werden.
4. Verwenden Sie das Gerät nicht, wenn Sie müde
oder alkoholisiert sind.
5. Stellen Sie sicher, dass der Arbeitsbereich gut
belüftet ist.
6. Verwenden Sie das Gerät nicht in der Nähe
von brennbaren Materialien oder Gasen.
7. Nicht im Regen verwenden.
8. Dieses Gerät sollte in einem trockenen, sicheren
Bereich aufbewahrt werden, in dem Kinder keinen
Zugang haben.
9. Stellen Sie sicher, dass die Stromquelle den
auf dem Typenschild des Geräts angegebenen
Anforderungen entspricht.
10. Kontrollieren Sie die Position des Stromkabels
bevor Sie mit dem MONO Lighter arbeiten.
11. Bei Arbeitsunterbrechungen für mehr als
30 Minuten ziehen Sie das Netzkabel aus der
Netzsteckdose. Richten Sie die Spitze niemals
auf Personen oder Tiere.
12. Um Verletzungen zu vermeiden, tauchen Sie
das Gerät nicht in Flüssigkeiten ein.
13. Versuchen Sie keine Arbeiten, die über die
Kapazität dieses Geräts hinausgehen.
14. Tragen Sie das Gerät nicht am Stromkabel.
Dies kann zu Schäden oder Stromschlag führen.
Ziehen Sie den Stecker nicht mit dem Netzkabel
aus der Steckdose.
15. Das Netzkabel sollte überprüft werden und
wenn es beschädigt ist. Zu Ihrer eigenen Sicherheit
ist es wichtig, dass ein autorisierter Elektrotechniker
Reparaturen an diesem Produkt vornimmt.
WARNUNG!
Es ist wichtig, das Benutzerhandbuch zu lesen, um
die Anwendungen, Einschränkungen und möglichen
Gefahren zu verstehen, die mit diesem Gerät verbunden
sind. Dieses Gerät ist nicht für die Verwendung von
Personen (einschließlich Kindern) mit eingeschränkten
physischen, sensorischen oder geistigen Fähigkeiten
geeignet.
DE MONO LIGHTER – BENUTZERHANDBUCH
No. Descreption Qty
1 Aluminium barrel 1
2 Cupper barrel 1
3 Mica paper 1
4 Heating wire comonents 1
5 Thermal protector 1
6 Washer 1
7 Fan tunnel 1
8 Taping screw 3
9 Fan blade 1
10 Taping screw 2
11 Motor support 1
12 Motor 1
13 Circuit board 1
No. Descreption Qty
14 Tapping screw 4
15 Housing 1
16 Housing 1
17 Rating label 1
18 Stand 1
19 Switch button 1
20 Switch 1
21 Capacitx 3
22 PA9 terminal 1
23 Cord clamp 2
24 Cord 1
25 Taping screw 5
SERVICE PARTS
EN
MONO LIGHTER – USER MANUAL
Please read these operating
instructions before using the
appliance for the first time and
keep them with the appliance
at all times.
SAFETY INSTRUCTION
1. This appliance is not designed for industrial or
tradeapplications. Do not use the appliance to per-
form applications for which it is not designed.
2. This appliance is not intended for use by young
children or infirm persons without adult supervision.
Young children should be supervised to ensure they
do not play with it.
3. Children and other visitors should be kept well
away from the work area and should not be permitted
to handle the appliance or power cable.
4. Do not use when tired or fatigued.
5. Ensure the work area is well ventilated.
6. Do not use in the rain or in wet or damp conditions.
7. This appliance should be stored in a dry, safe area
where children do not have access.
8. Ensure that the power source conforms to the
requirements stated on the name plate of the appli-
ance.
9. Check the position of power cables before com-
mencing work ensuring that it is positioned to the rear
of the machine.
10. For pauses in work for more than 30 minutes, dis-
connect the power cord from the mains power supply.
11. Never point the tip at people or animals.
12. To avoid personal injury do not submerge the
appliance in any liquid.
13. Do not attempt tasks beyond the capacity of this
appliance.
14. Do not force the appliance to do applications it is
not designed for.
15. Do not carry the appliance by the power cable.
This may cause damage or electric shock.
16. Do not pull the plug out of the power supply by
using the power cable.
17. Protect the cable from heat, oil and sharp objects.
18. The power supply cable should be regularly
checked and if damaged should be repaired by an
authorized electrical specialist
19. For your own safety it is important that an author-
ized electrical specialist carry out any repairs to this
appliance.
20. Disconnect the appliance from the mains before
cleaning or maintaining the appliance.
WARNING!
Read and observe the following safety instructions
before using this appliance to avoid personal injury.
It is important to read the instruction manual to
understand the applications, limitations and potential
hazards associated with this appliance. This appliance
is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they
have been given supervision or instruction concerning
use of the appliance by a person responsible for their
safety.
EN MONO LIGHTER – USER MANUAL
No. Descreption Qty
1 Aluminium barrel 1
2 Cupper barrel 1
3 Mica paper 1
4 Heating wire comonents 1
5 Thermal protector 1
6 Washer 1
7 Fan tunnel 1
8 Taping screw 3
9 Fan blade 1
10 Taping screw 2
11 Motor support 1
12 Motor 1
13 Circuit board 1
No. Descreption Qty
14 Tapping screw 4
15 Housing 1
16 Housing 1
17 Rating label 1
18 Stand 1
19 Switch button 1
20 Switch 1
21 Capacitx 3
22 PA9 terminal 1
23 Cord clamp 2
24 Cord 1
25 Taping screw 5
SERVICE PARTS
EN MONO LIGHTER – USER MANUAL NOTIZEN
No. Description Quantity No. Description Quantity
1 Aluminium barrel 1 14 Taping screw 4
2 Copper barrel 1 15 Housing 1
3 Mica paper 1 16 Housing 1
4 Heating wire components 1 17 Rating label 1
5 Thermal protector 1 18 Stand 1
6 Washer 1 19 Switch button 1
7 Fan tunnel 1 20 Switch 1
8 Taping screw 3 21 Capacitor 3
9 Fan blade 1 22 PA9 terminal 1
10 Taping screw 2 23 Cord clamp 2
11 Motor support 1 24 Cord 1
12 Motor 1 25 Taping screw 5
13 Circuit board 1
SERVICE PARTS
EN MONOLIGHTER – USER MANUAL