12
BASIC OPERATION
1.
Place the Power Switch in the ON position.
2.
Remove the Cartridge Protective Cap.
3.
If you intend to play a 45 RPM record, place the 45 RPM Adapter on the Spindle.
4.
Place a record on the Slip Mat, ensuring that it is firmly seated on the Spindle or 45
RPM Adapter.
5.
Set the 33/45 RPM Selector to the 33 or 45 position, depending on the type of
record being played.
6.
Turn the Start/Stop Knob to the Start position. The Platter will start spinning.
7.
Unlock the clip at the top of the Tonearm Rest, then set the Tonearm Lift Lever to
the up position.
8.
Position the Tonearm over the desired location/groove on the record.
9.
Carefully move the Tonearm Lift Lever to the down position to lower the stylus
onto the record.
10.
When you are finished, move the Tonearm Lift Lever to the up position, then move
the Tonearm to the Tonearm Rest and clip it into place. Turn the Start/Stop Knob to
the Stop position.
BLUETOOTH PAIRING
The Turntable features a built-in Bluetooth® transmitter to wirelessly play audio on a
Bluetooth speaker, headphones, or other playback device. Perform the following steps to
pair the turntable with your device.
1.
Power on your Bluetooth playback device and put it into Bluetooth pairing mode.
2.
With the Turntable powered off, place the Power Switch in the ON position. The
Bluetooth transmitter in the Turntable will begin searching for nearby Bluetooth
playback devices and the Bluetooth Indicator will begin flashing twice per second,
indicating that pairing with the nearest Bluetooth playback device is in progress.
