Monogram ZIS420N, Руководство по установке

Страница: 3 / 24

Design Guide
3
606 mm
Behind
Frame
676 mm
102 mm Min.
to Wall
102 mm Min.
to Wall
483 mm
330 mm
THE INSTALLATION SPACE
Water And Electrical Locations
The opening must be prepared with the electrical and
water supply located as shown.
The cutout depth must be at least 610 mm
The refrigerator will project forward, slightly beyond
adjacent cabinetry, depending on your installation.
Cutout depth beneath a soffit:
When installed beneath a soffit, the soffit cannot
exceed the 610 mm installation depth shown. The top
case trim overlaps the bottom of the soffit.
Additional Specifications
• 220 to 240 volt, 50 Hz., 4.5 amps power supply is
required. An individual properly earthed branch circuit
or circuit breaker is recommended. Install a properly
earthed electrical receptacle recessed into the back
wall. Electrical outlet must be located on rear wall as
shown.
• Use the supplied water line kit or GE SmartConnect ™
Refrigerator Tubing kit to connect the water line
on the refrigerator to the house water supply.
Installation of an easily accessible shut-off valve
in the water line is required.
DIMENSIONS AND CLEARANCES
Product Clearances
These refrigerators are equipped with a 2-position
doorstop. The factory-set 130° door swing can be
adjusted to 90° if clearance to adjacent cabinets or
walls is restricted.
*Finished cutout width must be:
1054 mm for 42” Models
1207 mm for 48” models
90° Door Swing 130° Door Swing
* Shipping height.
The refrigerator can
be adjusted to fit into a
cutout that is 2121 min.
to 2146 mm max. height.
Note that the top case
trim at the front is 13 mm
higher and will overlap
upper cabinetry or soffit.
Use leveling legs and
wheels for a maximum
25 mm height adjustment.
Allow minimum clearances for the freezer door
(Dimension A) and fresh food door (Dimension B)
for a full 130° door swing and to allow for pan removal.
Models A B C
42” 330 mm 483 mm 676 mm
48” 381 mm 508 mm 727 mm
For a 90° door swing, allow 101.6 mm min. clearance
to a wall for framed and stainless steel models. Allow
127 mm min. clearance for professional series models.
If the 90° doorstop position is used, pan access is
maintained, but pan removal is restricted.
See the illustrations on pages 4 and 5 to determine door
swing interaction with adjacent cabinets or countertops.
*Finished Width
42” Models, 457 mm
48” Models, 508 mm
2146 mm Max.
2121 mm Min.
Finished
Opening
610 mm
127 mm
127 mm
Water Supply
89 mm
89 mm
127 mm
152 mm
Electrical
Area
1905 mm From
Floor to Bottom
of Electrical
Area
645 mm Framed Models
654 mm Stainless Steel Models
Case Depth
Case Width:
1041 mm for 42” Models
1194 mm for 48” Models
*2121 mm
at Rear
*2134 mm
From Floor
to Top Frame
Frame to Frame:
1067 mm for 42” Models
1219 mm for 48” Models
Depth Including Handles:
683 mm Framed Models
729 mm Professional Models
A
B
C
606 mm
Behind
Frame