Monogram ZICS360NHRH, Инструкции по установке

Страница: 7 / 48

CUSTOMIZATION BASICS:
Framed Or Overlay Panels, Custom
Handles and Accessory Kits
These refrigerators are designed to be customized with
decorative panels. Field installed custom door and grille
panels are required.
Side Panels
Side panels must be used whenever the sides of the
refrigerator will be exposed.
7
Optional Accessory Kits
• ZKHCSS2: Monogram Tubular Stainless Steel handles
designed to fit 3/4
”
overlay panels. This kit also includes a
handle side trim for custom handles.
• ZKHPSS1: Professional Tubular Stainless Steel Handle
designed to fit 3/4” overlay panels. Kit includes one
handle. Order 2 kits for bottom-freezer refrigerators from
your Monogram supplier.
• ZUG2/ZUGSS2: For side-by-side installation of two
trimmed bottom-freezer refrigerators. This kit provides for
the installation of a unified custom grille panel to span the
width of two units using a framed or overlay panel.
• ZKHCT: Handle side trim for left-hand and right-hand
doors. For use on 3/4
”
custom panels when using a
custom handle.
Design Guide - Standard Installation
REFRIGERATOR LOCATION
• Do not install the refrigerator where the temperature
will go below 55°F (13°C). It will not run often enough
to maintain proper temperatures.
• Do not install the refrigerator where temperatures will
go above 100°F (37°C). It will not perform properly.
• Do not install the refrigerator in a location exposed to
water (rain, etc.) or direct sunlight.
• Install it on a floor strong enough to support it fully
loaded.