ZIC360NHRH
Monogram
®
36" Built-In Bottom-freezer Refrigerator
Product Specification Revised 5/16
NOTES
FLUSH INSET INSTALLATION
Grille Panel
Fresh
Food
Panel
Freezer Drawer Panel
A
Fresh
Food
Panel
Freezer Drawer Panel
E
B
C
D
A
B
C
D
E
74 1/2" 10 11/16" 46 9/16" 22 7/16"
36 7/8"
PANEL DIMENSIONS
FLUSH INSET 3/4" PANEL DIMENSIONS DUAL INSTALLATION
Trimmed refrigerators are designed to be
customized with decorative panels. Field-
installed 1/2" or 3/4" custom door, drawer
and grille panels are required. For 3/4"
raised panels, routing is required. The router
depth is 1/4" all the way around the panel’s
backs. Additional panel width reductions
are required per the diagrams shown. This
will create “picture frame’ routing allowing
the panels to slide into the attached door,
drawer and grille trims.
Maximum total panel weight:
• Fresh food door panels – 58 lbs.
• Freezer drawer panel – 28 lbs.
• Unified grille panel – 25 lbs
Door Handles
Door handles not included. Custom handles
supplied by your cabinet maker may be used.
ZKHPSS1:
Professional tubular stainless steel
handle designed to fit custom panels. Kit
includes one handle – 30 1/2" long. Order
2 kits from your Monogram supplier.
ZKHCSS2:
Custom European tubular handle
designed to fit custom panels. Kit includes 2
handles. Door handle is 44 3/16" and drawer
handle is 33 3/16".
Order ZUG2:
Unified grille kit for
dual installation. Maximum total panel
weight - 25 lbs.
ZKHCT:
Handle side trim for left-hand and
right-hand door. For use on a custom panel
when using a custom handle.
3/4" RAISED DOOR AND DRAWER PANEL ROUTING - (SEE PAGE 5
FOR 3/4" GRILLE PANEL ROUTING DIAGRAMS)
TOP
Front
Back
BOTTOM
3/4" PANEL SIDE VIEW
(AFTER ROUTING)
Front
NOTE: Routed areas should be
finished as they may be visible
when assembled.
CORNER VIEW SHOWING
“PICTURE FRAME” ROUTING
Back
HINGE
SIDE
HANDLE
SIDE
Front
Back
3/4" PANEL BOTTOM VIEW
(AFTER ROUTING)
3/4"
11/32"
1/4"
3/16"
1/4" 7/16"
DETAIL TOP
DETAIL BOTTOM
2 1/16"
3/16"
ROUTER DEPTH 1/4"
DETAIL HINGE
SIDE
DETAIL HANDLE
SIDE
