Monogram ZDI15 Скачать руководство пользователя страница 8

Installation Instructions

REVERSE THE DOOR SWING 

(cont.)

Reverse the hinges:

• Using a flat putty knife, remove the screw hole plugs

opposite the door hinges, top and bottom. Set aside.

• Remove the two screws holding top hinge. 

• Turn the hinge upside down, with the hinge pin

pointing up. Reinstall the hinge on the opposite side
at the bottom of the door.

• Remove the bottom hinge. Turn the hinge upside

down and install on the opposite side at the top. 

• Push screw hole plug buttons (supplied) into the

original screw holes.

• Remove the top hinge pin.

• Place plastic hinge sleeve on the bottom hinge and

position the door onto the pin.

• Place plastic hinge sleeve in the top hinge hole on

the door. Align the door on the bottom hinge and
replace top hinge pin.

• Reinstall handle with original screws.

Hinge Pin

Hinge Sleeve/
Door Stop

Hinge

Plugs

Hex Head Hinge Screw

Plugs

Hinge Sleeve/
Door Stop

Hex Head
Hinge Screw

Hinge Pin

Hinge

Top Hinge

Bottom Hinge

REVERSE THE DOOR SWING 

(cont.)

To reverse the door catch:

• Remove the plastic screws

from the opposite side 
of the door.

• Remove the metal screws

from the magnetic door
catch and reinstall on the
opposite side of the door.

• Install the plastic screw 

into place on the opposite
side of the door.

Reverse
Door Catch
Position

Top Hinge

Bottom Hinge

8

Содержание ZDI15













Отзывы: