Monodraught Sunpipe LuxLoop, Руководство по установке, Страница: 4 / 8

info@monodraught.com / +44 (0)1494 897700 4
1.
The panel is suitable to 15 mm and 24 mm ceiling grids.
For 15 mm Designer Grids
Relevant tabs should be folded out in each corner,
allowing them to rest on the grid.
SUNPIPE LuxLoop Panel Model
For 15 mm Exposed T Grids
Lower tabs should be folded out in each corner,
allowing them to rest on the grid.
For 24 mm Exposed T Grids
All tabs need to be folded out to prevent the panel
from shifting but the panel rests on the grid rather
than the tabs.
2.
Remove tile from ceiling grid (if needed).
3.
Assemble the Slip Length and slide over the last SUNPIPE
length, temporarily securing it with tape.