Mono Fusion Compact PRO Скачать руководство пользователя страница 75

Страница: 75 / 106

Fusion Compact Pro Bread Plant, Rev. A21 14-04-21

4.0 SAFETY

Never use a machine in a faulty condition

and always report any damage.

No-one under the age of 16 may operate

this machine.

No-one under the age of 18 may clean

this machine under any circumstances.

Only trained personnel may remove any part

from this machine that

requires a tool to do so.

Always ensure hands are dry

before touching any electrical appliance

(including cable, switch and plug).

All operatives must be fully trained.

People undergoing training on the machine must be under direct supervision.

Do not operate the machine with any panels removed.

All guards must be fixed in place with bolts or screws

unless

protected by a safety switch.

No loose clothing or jewellery

to be worn while operating the machine.

Switch off power at the mains isolator when machine is not in use

and

before carrying out any cleaning or maintenance.

The pressure board adjusting handle, side guide adjuster handle and

dough sheet roller gap lever may be adjusted while the machine is running.

ALL OTHER CLEANING AND MAINTENANCE OPERATIONS MUST BE MADE
WITH MACHINE DISCONNECTED FROM THE POWER SUPPLY

DO NOT ATTEMPT TO CLEAN THE MOULDING BELT

WHEN THE MACHINE IS RUNNING

CLEANING AND MAINTENANCE OPERATIONS MUST BE MMACHINE

IS RUNNI

The Bakery Manager or the Bakery Supervisor must carry out daily safety

checks on the machine.

WARNING:

Hand or bodily contact with moving belt surfaces may cause friction burns to skin.
This situation need not occur to successfully operate the moulder

Содержание Fusion Compact PRO











































































































Результаты поиска

Содержание Fusion Compact PRO

Отзывы:

Похожие инструкции для Fusion Compact PRO

Бренды по названию

Популярные бренды

Mono Fusion Compact PRO, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание Fusion Compact PRO

Отзывы:

Похожие инструкции для Fusion Compact PRO

Бренды по названию

Популярные бренды