SAFETY RECOMMENDATIONS
-
READ CAREFULLY
Be sure the use of this product is allowed in the country and in the environment required.
The use of this product may be dangerous and has to be avoided in the following areas:
•
Where it can interfere with other electronic devices in environments such as hospitals
airports, aircraft, etc.
•
Where there is risk of explosion such as gasoline stations, oil refineries, etc.
It is the responsibility of the user to enforce the country regulation and the specific
environmental regulation.
Do not disassemble the product; any mark of tampering will compromise the warranty
validity. We recommend following the instructions of this user guide for correct setup and
use of the product.
Please handle the product with care, avoiding any dropping and contact with the internal
circuit board as electrostatic discharges may damage the product. The same precautions
should be taken if manually inserting
a
SIM card, checking carefully the instruction for its
use. Do not insert or remove the SIM when the product is in power-saving mode.
Every device has to be equipped with
a
proper antenna with specific characteristics. The
antenna has to be installed with care in order to avoid any interference with other
electronic devices and has to guarantee
a
minimum distance from the body (23 cm). In
case this requirement cannot be satisfied, the system integrator has to assess the final
product against the Suspicious Activity Reports (SAR) regulations.
The European Community provides some Directives for the electronic equipment
introduced on the market. All the relevant information is available on the European
Community website: http://ec.europa.eu/enterprise/sectors/rtteldocuments/.
Additional Information and Support
For additional information or more detailed instructions on how to use your Monnit Wireless
Sensors or iMonnit, please visit us on the web at Monnit.com.
M )NNIT:
Monnit, Monnit Logo and all other trademarks are property of Monnit, Corp.
© 2021 Monnit Corp. All Rights Reserved.
MS-IRH-AUG (12/21)