Mönninghoff ServoFlex 328 Series, Инструкция по эксплуатации и сборке

Страница: 23 / 50

ServoFlex Type 328.XX
Setup and method offunction
2013-09-12
23
Mönninghoff
4.2 Description
4.2.1 Features
Mönninghoff ServoFlex clutches are connecting couplings. The
ServoFlex clutches are distinguished by the following characteris-
tics:
Compensation of axial, radial and angular displacements
Suitable for clockwise and counter-clockwise and alternating
load operation
High transmittable torques
Low absorption of torque peaks, direct torque transmission
4.3 Functional method
The clutch connects drive and drive shaft like a cardan joint but
with a maximum angle that must be maintained.
The clamping hubs attached to both shaft ends are fixed to the
shaft by clamping pins.
The clamping hubs are screwed to the diaphragm assembly with
high-strength screws. This connection is force locking and
therefore wear free.
WARNING
Using a clamping hub
When using a clamping hub, installation in potential-
ly-explosive areas is restricted (category 3).
Ex marking: II 3 GD c IIC X