EN
Versionsnr. 2016-08 - Montageanleitung TabLines TWE Tablet Wandeinbau
Version no. 2021-10 - Mounting instructions MonLines mySwing MSM05
11
Possible causes
7. Troubleshooting
Error
Verification
The mount does not move.
Dead battery /
defective remote control
No power connection
Incorrect operation
If the LED on the remote control
comes on but no signal tone is heard,
replace the battery. If the problem
persists, feel free to contact us by
email or phone.
Check the correct connection of the
power cord to the mount and the
power plug to the power outlet.
If you only hear a double signal tone
after pressing a position button, the
mount is already in the position
stored on this button.
After automatic return to the initial
position (0°), the mount performs a
slight jerking movement.
No infrared connection
Check the position of the infrared
receiver and, if necessary, place it in
a more accessible location.
First use the arrow keys to move the
mount to a position slightly ahead of
the previously set initial position.
Now press "M" + "IN" simultaneously.
The current position is now stored as
the new initial position on the "IN"
button (see also section 5.4).
Overload
