EN
Mounting instructions MonLines mySwing MSM05 - Version no. 2021-10
10
The mount moves to the position stored on "IN" (default value: 0°). By pressing the
"M" + "IN" buttons simultaneously, you can set a new position for "IN". A signal
tone is heard for confirmation.
The mount moves to the position stored on "OUT" (default value: 90°). By pressing
the "M" + "OUT" buttons simultaneously, you can set a new position for "OUT". A
signal tone is heard for confirmation.
Used in combination with "IN", "OUT", "P1" or "P2" to store positions on these
buttons.
The mount moves to the position stored on "P1". By pressing the "M" + "P1"
buttons simultaneously, you can set a new position for "P1" (default value: 30°).
The mount moves to the position stored on "P2". By pressing the "M" + "P2"
buttons simultaneously, you can set a new position for "P2" (default value: 60°).
Press and hold the left / right arrow key to swivel the mount to the left / right.
Releasing the key stops the movement. The maximum swivel range is limited in
both directions each by the distance of the swivel arm from the wall to avoid
collisions.
The mount automatically returns to the last previously selected position. This
angle is automatically saved and continuously updated.
6. Button assignment
