
Chapter 2. Operating Instructions
4. Lower stabiliser leg upright by lifting
spring loaded catch and letting upright
drop. Make sure upright is in firm con-
tact with the ground and release catch.
5. Check that the rung-lock bungey cord
on ladders is loose by pulling the top
end of the cable straight up and releas-
ing.
6. Raise platform above desired height by
lifting from side of platform and slowly
lower. Platform will lock into position
resting on runglocks.
7.
Check rung-locks are fully en-
gaged.
If locks are not engaged repeat
steps 5 to 14.
Climbing Ladder & Enter-
ing Platform
Before the ladder is climbed the following
checks must be made each time:
•
Check that the assembly is still correct
and complete including stabiliser legs in
position.
•
Check that ladder locks are locked into
place.
•
Climb ladder using rungs and built in
handles for handholds and maintaining
3 points of contact at all times.
•
Climb through spring loaded door onto
platform.
User Manual
5
Monkey Tower Ltd
Содержание 1.1 EN 1298 IM
Страница 15: ...placeholder ...