MONKEY GRIP SPEED DRIVE 17045-MG Скачать руководство пользователя страница 2

Some of the following symbols may be used on this product. Please study them and learn their 

meaning. Proper interpretation of these symbols will allow you to operate the product better 

and safer. 

SYMBOL

NAME

DESIGNATION/EXPLANATION

Safety Alert

Read The Operator’s Manual

Eye Protection

Wet Conditions Alert

Hot Surface

Indicates a potential personal injury hazard

To reduce the risk of injury, user must read and 

understand operator’s manual before using this product  

Do not expose to rain or use in damp locations

To reduce the risk of injury or damage, avoid contact 

with any hot surface

Always wear eye protection with side shields marked to 

comply with ANSI Z87.1

 

INSPECT INFLATOR AFTER UNPACKING

After unpacking your inflator, carefully inspect the inflator to ensure there is no damage that may

have occurred during transit and verify all components have been included as listed and shown

on page 5

IMPORTANT! READ ALL INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO USE THIS

INFLATOR. FAILURE TO FOLLOW WARNINGS AND COMPLY WITH ALL INSTRUCTIONS

COULD RESULT IN FIRE, PROPERTY DAMAGE OR INJURY TO PERSONS

 

PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION
OPERATE INFLATOR WITH 12 VOLT DC POWER OUTLETS RATED 15 AMPS OR HIGHER. DO

NOT USE WITH OLDER 8 AMP CIGARETTE LIGHTER RECEPTACLES
DO NOT USE INFLATOR CONTINUOUSLY FOR MORE THAN 10 MINUTES. ALLOW UNIT TO

COOL BETWEEN USES
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE

INTRODUCTION

TABLE OF CONTENTS

2

Introduction______________________________________________________________________________2

General Safety Rules and Warnings________________________________________________________3

Quick Start Guide_________________________________________________________________________4

Featured Product Illustrations______________________________________________________________5

Inflator Operation_________________________________________________________________________6

 

Inflating Tires

_________________________________________________________________________6

 

Inflating Sports Balls or Other High Pressure Small Inflatables

_______________________________6

Maintenance_____________________________________________________________________________7

Trouble Shooting_______________________________________________________________________7-8

Warranty_________________________________________________________________________________8

Contact Us_______________________________________________________________________________8

Содержание SPEED DRIVE 17045-MG









Отзывы: