Monitoring Centre Notification
When contacted by the monitoring centre, you
need to respond using your Password, you then
have two options.
To acknowledge and cancel - press 1.
This stops the monitoring centre from contacting
your next nominated contact or number. You do
this when you intend to act on the notification, or
if you are confident it is a false alarm (e.g. the
alarm was triggered as you entered the premises
or you are testing the system). Remember that if
you do not respond to the first alert, the
monitoring centre will call the next nominated
contact you have chosen.
To acknowledge, cancel and disable all notification
- press 3.
If you would like to stop the automated service
from calling you for a period of time, you can
select to disable the notification service from 1 to
12 hours. The alarm system will continue to
operate, but your notification service will be
cancelled for the period you have selected.
Important Things to Remember
Remote access dial in facility
If you forget to arm your system before leaving
home, you can dial in and activate the control
panel by telephone. See the User Guide for more
information.
Changing your Master Access Code
The default Master Access Code required for
disarming your system is 1234. We recommend
that you change this code to something that only
you and your family will know.
1. To change this code, open the front cover, the
panel will say “use numbered keys to enter ID”
2. Enter code 1234. The panel will say “Please
select from start menu”.
3. Select ADD, then press ACCESS CODE once.
The panel says “Master Code” , press done.
4.Type in the new four digit code that you wish to
use to disarm your system. The system will
confirm your new Master Access Code.
You may wish to write your new Master Access
Code in the important things to remember
section, please ensure this booklet is kept in a
safe place.
You can assign additional Access Codes for
people who you want to disarm the system.
Follow the instructions above and press the
Access Code button until you find the option
required or refer to the user guide for more
information.
Control Panel Beeps
Panel beeps are used to indicate key presses and
system problems, such as a low battery warning.
You can disable panel beeps for four hours by
pressing the System Status button followed by the
Disarm button. Trouble beeps will continue four
hours later, until the problem is resolved.
Pressing the System Status button will tell you
what the problem is. If you need help to cancel the
panel beeps or reduce the volume, please call us
on 0845 071 1007
For further help and advice about your
monitor
24hr. wireless intruder & fire alert
system or to purchase
additional sensors, visit
www.myhomemonitor.co.uk
My 6 digit User ID number provided when I first
registered my system on the website
The default Master Access Code
(This is required for disarming your system).
This code should be changed to a number that
you and your family can remember
Default Master Access Code is 1234
My Master Access Code
35297 Monitor Quick Start Guide 16/1/07 11:20 Page 7
