WARRANT Y
SPECIFICATIONS
General Safety
CAUTION: It is essential that all instructions in this manual be
followed to ensure proper operation of the equipment and safety
of operating personnel. The use of this symbol is used through-
out this manual to highlight important safety issues. Please pay
particular attention to these items.
Electrical Shock Caution
All tilt switches may be configured to “switch” HIGH VOLTAGE
depending on the application requirements. To avoid electrical
shock, remove power before opening enclosure. Each unit is
provided with a “protective ground” connection which shall be
terminated to earth ground potential. This terminal shall be used
to eliminate shock hazard in the unlikely event of internal insula-
tion breakdown.
SAFET Y
Monitor Technologies LLC warrants each tilt switch it manufac-
tures to be free from defects in material and workmanship under
normal use and service within two (2) years from the date of pur-
chase. The purchaser must give notice of any defect to Monitor
within the warranty period, return the product intact and prepay
transportation charges. The obligation of Monitor Technologies
LLC under this warranty is limited to repair or replacement at its
factory. This warranty shall not apply to any product which is
repaired or altered outside of the Monitor Technologies LLC fac-
tory, or which has been subject to misuse, negligence, accident,
incorrect wiring by others or improper installation. Monitor
Technologies LLC reserves the right to change the design and/or
specifications without prior notice.
Model TC-3
Power Requirements: None
Output: SPDT, 10A @ 250 VAC max
Sensitivity: 17˚ from vertical axis
Enclosure: Cast aluminum, unpainted
Enclosure Protection: NEMA 4, IP56
Mounting Connection: Eyebolt, 3/4 in (19mm) I.D.
Wire Entry: 3/8" NPT cord connector
Cord dia 0.25-0.38 in (6.4-9.6mm)
Operating Temperature: -40˚ to 175˚F (-40˚ to 80˚C)
Weight: 3lb (1.35kg)
Approvals: CE Mark
CHINA RoHS 2
Model TC-1
Power Requirements: None
Output: SPDT, 15A @ 250 VAC max
Sensitivity 17˚ from vertical axis
Enclosure Cast iron, painted beige
Enclosure Protection NEMA 4, IP56
Mounting Connection Eyebolt, 1-3/32 in (27.7mm) I.D.
Wire Entry 1/2" NPT cord connector
Cord dia 0.25-0.38 in (6.4-9.6mm)
Operating Temperature -40˚ to 250˚F (-40˚ to 121˚C)
Weight 24lb (11.25kg)
Approvals: CE Mark
CHINA RoHS 2
MECHANICALS
B U L L E T I N
634
DIMENSIONS ARE SHOWN IN INCHES WITH MILLIMETER EQUIVALENT IN BRACKETS
OPTIONAL ACCESSORIES (TC-3)
PART #
DESCRIPTION
4-8001
TC-3 Extension actuator, 20” overall extension length,
stainless steel extension and ball float.
4-8002
TC-3 Extension actuator, 20” overall extension length,
galvanized steel extension and polypropylene ball float.
4-8001
4-8002
20.53 + .19
[522 + 5]
8.12
[206]
20.53 + .19
[522 + 5]
8.25
[210]
7.00
[ 178]
8.00
[ 203]
.75
[19]
GDR
JSC
AUG 05 2016
DOC-001-634A 12
DIMENSIONS ARE SHOWN IN INCHES WITH MILLIMETER EQUIVALENT IN BRACKETS
