Monitor Audio Gold W12, Руководство пользователя

Страница: 17 / 228

Specifications
Model Gold W12 Subwoofer
System Format
Long-throw 12” driver featuring ‘dished’ C-CAM cone.
Dual 200 mm ABR (auxiliary bass radiator) 25 mm M.D.F. construction with internal bracing and sealed
amplifier compartment
Lower Frequency Limit
-3 dB @ 25 Hz/ -10 dB @ 20 Hz (Free Field)
Music preset: -3 dB @ 19 Hz/ -10 dB @ 16 Hz (In Room)
Assignable Low Frequency Limit Protection Filterdefault (-3 dB @ 12 Hz)
Upper Frequency Limit -3 dB @ 150 Hz
Drive Unit Complement 1 x 12” C-CAM subwoofer driver featuring triple suspension and 3” long throw voice coil
Linear Driver Excursion 19 mm Peak to Peak. Total displacement 1.6 Litres
Amplifier Output (watts)
600 W
Amplifier Classification Class D with high current Switch mode power supply (SMPSU)
DSP
50 MHz DSP Core with 1024 instructions per sample, 138 dB of dynamic range and 56-bit double precision
processing, dynamically updated by a 40 MHz MCU
Digital Conversion 24 bit/ up to 48 kHz ADCs & DACs built into ADAU1701 DSP Core
LED UI Control Panel
Adjustable brightness 0% - 100%, configurable auto off feature. Quick access to menu items: Trim & Mute,
LPF, Phase, Preset Select
Global Settings
(via SubConnect)
Display Brightness (0 - 100%), Dim (to 10% or to Off), Default Preset, Mute Link Outputs, 12 V Trigger Assignment
(Power On/ Off or Preset select), Input gain (Master -80 to +20 dB, Trim -11 to +11 dB, Mute), Phase (0 –
360 in 15-degree steps), Night Mode Threshold (0 dB to -36 dB), Auto On/ Off (Enable Signal Sense, Always
On, Time to Off 5 – 240 minutes)
User Presets
(via SubConnect)
4 fully configurable user Presets including, Preset Name, LPF Frequency (5 Hz Steps from 20 – 135 Hz), LPF Slope
Order (-12 or -24 dB/ Oct), Input (Stereo, LFE or Both), Trim Offset (-6 to +6 dB), EQ mode (Impact, Music, Movie
or Default), User EQ (6 adjustable filters applied on top of EQ mode), Room EQ (On/ Off), Night Mode (On/ Off)
User Equalisation
(via SubConnect) 6 fully controllable EQ filters and 4 default filters with gain offset per preset, Default settings: Flat/ Music/
Movie/ Impact
Room Correction EQ
6 System controlled parametric EQ filters set using advanced detection algorithm.
Measurement can be initiated from the control panel or the SubConnect with up to microphone 6 positions (default 2)
Night Mode
Night mode, assignable (On or Off) per Preset with global threshold (0 dB to -36 dB). Introduces dynamic
range reduction lowering the level of loud sections
Phase Control 0 – 360 degrees Increments of 15 degrees with a pure invert at 180 degrees
Low Pass Filter Alignment 2nd or 4th order (12 or 24 dB/Octave), Increments of 5 Hz from 35 Hz to 135 Hz
Auto Sensing Input
Requirements
Line Level >1mV on unbalanced and balanced inputs.
Auto Standby feature, adjustable between 5 – 240 minutes in increments of 5 minutes
Digital Volume Level -11 to +11 dB in 1 dB increments, Via the control panel. -80 to +20 in 1 dB increments, via SubConnect application
IR Remote Control Code
Supplied IR remote. Front facing IR receiver with red LED indication
SubConnect
(PC Application)
Windows (7 onwards) (32/ 64 bit) compatible setup application available from the Monitor Audio website.
Allows the user to control advanced subwoofer setup features.
Settings can be saved while not connected to the subwoofer for off-site setup
Audio Input/Outputs
LFE balanced input (XLR), LFE unbalanced input (RCA), stereo unbalanced inputs (RCA)
LFE balanced output (XLR), LFE unbalanced output (RCA), stereo unbalanced outputs (link RCA)
monitoraudio.com 15
ENGLISH