4. Never use close to staircases, swimming pools, hot surfaces, close to electric cords, curtain cords
and sockets or areas, which carry potential risk for your child,. The product may move during use.
5. In order to avoid upturning, place the product on even and smooth surface.
6. Strings can cause suffocation! DO NOT PLACE objects with strings around the neck of the child for
examples hood strings or strings of soothers or pacifiers. DO NOT HANG strings above the product
and do not tie strings to the toys.
7. The product can be used up to 20 minutes at one time.
8.
IMPORTANT!
Please, keep these instructions for future reference.
9. Please, read these instructions before the assembly and use of this products.
10. The assembly must be performed by an adult .
11. One of the toys works with batteries. In order to place the batteries you will need a Phillips
screwdriver (not included in the product). For activation of the music functions of the toy are needed 3
pieces1.5V „АА” (LR6) alkaline batteries (not included in the product).
12.
IMPORTANT!
Before assembly and each use, check the product for damaged parts, loose
connections, missing parts or sharp edges. DO NOT USE if any of the parts is missing or broken.
13. The characteristics and decorations of the product may vary from those, shown in the pictures of
this instruction or the packaging. The manufacturer keeps their right to change any part of the product
without prior notice.
PARTS
1. Electric toy
2. Shape slider
3. Spinning toy
4. Spinning disc
5. 2 hanging toys
6. Seat tray with 3 frame connectors
7. Seat pad
8. Seat
9. 3 bases
СГЛОБЯВАНЕ
1. Step 1 – Look fig. А:
Insert and “snap“ the shape slider, the spinning disc, the electric toy and the
spinning toy in the intended places on the seat basis.
2. Step 2 – Look fig. B:
Place three basis on the flat surface. Press the button of the short basis tube
and insert it in the long tube of the other basis. Ensure that you have heard the button “click” on its
place and pull the tube to ensure that it is locked on its place. Repeat this to assemble the other parts
of the basis too.
3. Step 3 – Look fig. С:
Pull the seat pad through the seat and wrap the endings of the fabric around
the external side of the seat.
4. Step 4 – Look fig. D:
Insert the six buttons on the upholstery in the seat tray openings. Ensure that
the logo of the product is in the rear part of the seat ( this is the highest point).
5. Step 5 – Look fig. E:
While pressing the frame construction buttons, insert them in the basis tubes.
Continue to slide the frame tube over in the basis tube, until you hear “click”. Then pull up the frame
tube to ensure that it is locked.
6.Стъпка – Вижте фиг. F:
Insert and “snap” the seat with the seat pad in the seat tray. Pull up the
seat to ensure that it is secured.
7
Содержание MUSICAL FRIENDS 668-27
Страница 2: ...PARTS ASSEMBLING A B C 2...
Страница 3: ...D E F 6 12 81 EN71 1 2 3 6 11 300 81 4 5 6 7 20 8 9 10 11 3 1 5V LR6 12 13 BG 3...
Страница 4: ...1 2 3 4 5 2 6 3 7 8 9 3 1 1 2 2 B 3 3 4 4 D 5 5 E 6 6 F 3 x 1 5V AA 1 2 3 1 5V LR6 3 4 5 6 1 4...
Страница 5: ...2 3 4 5 6 7 8 9 10 5 1 1 3 1 2 3 2...
