•
WARNING!
Adult assembly required. Children can be harmed by small parts, sharp edges and sharp points in the
vehicle’s
unassembled state. Care should be taken in unpacking and assembly of the vehicle. Do not allow the children to play with
any of the parts or to help in the assembly of the vehicle. Identify all parts before assembly and save all packing material
until assembly is complete to ensure that no parts are discarded.
•After each step you must check if each part is correctly placed and well fixed. Follow strictly each step and study well the
assembly figures.
•
DO NOT
over-tighten in order to avoid any damage.
1. Step 1
– Attaching the front axle and steering column – See Figure 1:
Place firstly the square tube on the
SUV’s body
and fix it using 4*12 big flat head screws and a screwdriver. Then slide the steering fork through the opening in the front
gearbox. Take the front axle and attach to it: steering plate
→ the small bushings of the front shock absorbers → the springs
of the front shock absorbers
→ the big bushings of the front shock absorbers/ Then take the front axle frame assembly and
pace in on the square tube. Align the holes on the frame and the tube, which are for the fixing screws. Place a washer on top
of each hole. Slide the screws through the holes and fix them using a screwdriver.
2. Step 2
– Attaching the front wheels - See Figure 2:
Attach to each side of the front axle: washer
→ front wheel →
washer
→ nut. Using 2 wrenches fix the wheels. Then attach the decorating rings and decorative covers to the wheels.
3. Step 3
– Attaching the middle axle, rear axle and the gearboxes – See Figure 3:
Remove the middle and rear axles
from the
SUV’s body. Place the springs for the middle shock absorbers (white colored ones) in the corresponding holes od
the body. Place the middle axle on top of the springs and then place the covers on top. Fix them using 8 pcs 4*23 big flat
head screws and screwdriver. Then place the spring of the rear axles in the corresponding holes in the
SUV’s body. These
springs are black color. Place the rear axle on top of them and the shock
absorber’s covers. Fix them using 8 pcs 4*23 big
flat head screws and screwdriver.
After that, attach a washer on both sides of the middle axle and attach the gearboxes to the axle. Connect the cables of the
gearboxes to the cables coming out of the
SUV’s body. Connect the white plug to the white connector and the red plug to
the red connector. Follow the marking L and R on the gearboxes and
SUV’s body.
4. Step 4
– Attaching the middle and rear wheels – See Figure 4:
Attach on both sides of the middle axle a wheel and a
washer. Fix the wheels with nuts and 2 wrenches. Then attach the decorative rings and covers to the wheels. To attach the
rear wheels place on the rear axle: washer
→ bushing → washer → rear wheel → washer. Fix the wheels with nuts and 2
wrenches. Finally attach the decorative rings and covers to the wheels.
5. Step 5
– Attaching the steering wheel – See Figure 5:
Place the steering wheel connector on the tip of the steering
fork. Align the holes of the connector and steering fork intended for the fixing screw. Slide the fixing screw (5*30) through
these holes and fix it using nut and screwdriver. Then attach the steering wheel to the top of the connector and press
carefully down until it clicks into place.
6. Step 6
– Attaching the front windshield and front hood – See Figure 6:
Attach the front windshield to the front hood
and use 2 pcs 4*12 big flat head screws to fix them to each other. Then place the windshield with the hood in the front of the
SUV’S body. Press carefully down until they are fixed to the body.
7. Step 7
– Attaching the rearview mirrors – See Figure 7:
Place the rearview mirrors in the corresponding holes in the
body. Fix them using the connectors and 4 pcs 4*12 round head screws and screwdriver.
8. Step 8
– Attaching the rear frame and search lights – See Figure 8:
Attach one part of the rear frame to the frame with
search lights. Press carefully to fix them. You will hear a click. Then attach the cables of the lights with those coming out of
the SUV body. Insert the frame with lights into the corresponding holes in the rear body.
Be careful not to tear the cables!
Press down carefully to the click the frame in place.
9. Step 9
– Attaching the seat – See Figure 9:
Place the seat on the SUV body and use 2 pcs 4*12 screws and
screwdriver to fix it.
10. Step 10
– Connecting the battery – See Figure 10:
Lift the front hood and connect the SUV
‘s cables to the battery –
red plug with red plug.
16
ASSEMBLY STEPS
HOW TO OPERATE THE BO SUV
See Figure U:
1.Lights; 2.Mode multifunction button; 3.High/ Low speed; 4.Forwar; 5.Backward; 6.Bluetooth; 7.Music/ volume
down button; 8.Music/ volume up button; 9.Music button; 10.Power button
–
to turn on or off the SUV.
To move the SUV forward press button 4 (D/ Forward) and press the foot pedal. If the pedal is released, the SUV stops
moving.
To move the SUV backwards press button 5 (R/ Back) and press the foot pedal. If the pedal is released, the SUV stops
moving.
The product is designed to operate in reverse in low speed only.
WARNING!
Always stop the SUV when changing the direction of movement or the speed in order to avoid damage of the
gearboxes or motors.
Содержание JC003
