9
MOBILE APP COMMANDS
These are the SMS (text) commands that can be sent from the
mobile APP. These commands are the most frequently used.
This screen also shows the current status and previous settings.
When commands are sent from the APP to the tracker, they are sent
as text messages from your mobile phone. The APP opens your
phones text messages displaying the command as a text code to be
sent to the tracker
……
.. Just press
‘
send
’
.
For most commands, a reply text message will be received confirming
the action.
NOTE:
Do not send texts directly from your phone (must be via the
APP) as the APP
’
s status will not be updated.
Should you require greater control, see the
‘
Advanced User
’
commands.
COMMANDS AVAILABLE VIA THE MOBILE APP
Command
Function
Arm / Disarm
Turns text alerts on or off. When ON, text alerts are sent
for possible intrusion for ignition on and shock(vibration)
sensor.
Engine Immobiliser
via starter motor
On or Off
Prevents engine starting.
If vehicle is stopped, immobilisation is immediate.
Above 20kph, circuit pulses for 1 minute before shut down.
Get Location Data
Provides latitude/longitude as a text message
–
click on
blue text to open your phones mapping system (not APP)
Tracking Frequency
Sets how often the tracker updates its location when
moving. Default is every 15 seconds - accurate trace
Time Zone
Set hours ahead of GMT your tracker is located. Adjust for
daylight saving when applicable.
Vibration Level
Adjust the sensitivity of the shock sensor. 1~9 (1 most
sensitive)
Speed Alert
Sets a maximum permitted speed. Speeding sends alert
Move Alert
Sets a radius of permitted movement.
Master User
Number
The main users mobile phone number
Authorised
Number
2 other authorised users to receive messages (SOS)
Text Command
Password
Choose your own unique 6-digit number. (default 123456)
(This does not change your logon password
–
see page 7)
Reset
Resets settings to factory default
