Mongoose M60AM, Инструкции по эксплуатации

Страница: 14 / 25

REMOTE ‘CODE LEARNING’:
To learn a remote or additional remote:

Disarm the system

Open the drivers door and leave open

Turn the ignition ON/OFF 3 times (ignition remains off)

The siren will chirp 3 times, the indicators will flash 3 times and the dashboard LED will
light permanently to confirm you have entered remote code learning mode.

Press button one on the first remote – siren will chirp once as confirmation of reception

Press button one on the second remote – siren will chirp twice as confirmation of reception

Repeat for up to four remotes (siren will chirp 3 times for the third and 4 times for the
fourth)

Leave the system for 10 seconds and the learning mode is completed. This is confirmed
by three fast chirps and light flashes.
NOTE: When learning a new replacement or additional remote, the original remote(s) must be
re-learnt or they will be erased from memory and will not operate this system.
To delete a lost remote from memory:
Enter learning mode as detailed above. Memorise existing remote once. The lost remote is now
deleted. When a replacement is obtained, learn both the existing and new remotes into memory as
detailed above.
14