5
PARTS DESCRIPTION
1.
Temperature regulator
2.
Burst of steam button
3.
Spray button
4.
Spray nozzle
5.
Water inlet
6.
Indicator light
7.
Steam control knob
8.
Soleplate
9.
Heating base
10.
Water tank
11.
Self-clean button
12.
Power unit
13.
3-position switch
14.
Stand
BEFORE INITIAL USE
Remove all packaging material.
Clean the iron base (see cleaning).
Open the cover of water filling opening and fill distilled water into the water filling opening up to max marking
of the water tank. For this, use the measuring cup. Do not use chemically decalcified water.
Insert the power plug into a designated outlet and set the temperature regulator on the highest temperature
setting. When the indicator light goes off, the required temperature is reached. The iron is ready for use, set the
steam selection switch to position and iron on an old piece of cloth to remove possible residue.
With first use, there can be slight odor or smoke. But this is harmless and only of short duration. Make sure
there is adequate ventilation.
USE
Before selecting the temperature, read the instruction manual for the iron or the care advice on the tag of the
clothing.
Note: If there is no care advice on the piece of clothing, then you should begin ironing with the lowest
temperature. With lower temperatures, there will be less steam.
Caution: Synthetic fabrics can melt.
OFF
.
Nylon, Silk
..
Wool
…MAX
Cotton, Linen, highest temperature
3-position switch on the stand:
- cordless mode: the iron can be used without the power unit.
- storage position: the iron, the power unit and the stand would be locked together.
