Moneual 972, Руководство по эксплуатации продукта

Страница: 14 / 86

14 ENGLISH
2-1. Before You Begin
Installation Precautions
When you install and test the MonCaso 972 series system, observe all warnings and
cautions in the installation instructions.
To avoid injury, be careful of:

Sharp pins on connectors

Sharp pins on printed circuit assemblies

Rough edges and sharp corners on the chassis

Hot components (like processors, voltage regulators, and heat sinks)

Damage to wires that could cause a short circuits
Observe all warnings and cautions that instruct you to refer computer servicing to qualified
technical personal.
Prevent Power Supply Overload
Do not overload the power supply output. To avoid overloading the power supply, make sure
that the calculated total current loads of all the modules within the computer is less than the
output current rating of each of the power supplies output circuits.
Observe Safety and Regulatory Requirements
Read and adhere the instructions in this section and the instructions supplied with the
chassis and associated modules. If you do not follow these instructions and the instruction
provided by the chassis and module suppliers, you increase safety risk and the possibility of
noncompliance with regional laws and regulations. If the instructions for the chassis are
inconsistent with the instructions for associated modules, contact the supplier’s technical
support to find out how you can ensure that your computer meets safety and regulatory
requirements.