22
32D1999
CLEANING AND SERVICING
Remove logs, handling carefully by holding gently at each end. Gloves are recommended to prevent skin irritation from
ceramic fibers. If skin becomes irritated, wash gently with soap and water. Refer to manual for correct log placement.
PERIODIC CLEANING - REFER TO PARTS DIAGRAM FOR LOCATION OF ITEMS DISCUSSED BELOW.
• Do not use cleaning fluid to clean logs or any part of gas logs.
• Logs - brush with soft bristle brush or vacuum with brush attachment.
• Vacuum loose particles and dust from the control and grate weldment.
• Inspect and clean burner air intake holes. Remove lint or particles with vacuum or brush. Failure to keep air intake holes
clean will result in sooting and poor combustion.
• If embers (rockwool) have turned a rust color and become brittle, remove old embers (rockwool) from log set. Replace
with new rockwool. Rockwool can be purchased from your local dealer. See log placement section for placement of
embers.
ANNUAL CLEANING/INSPECTION - REFER TO PARTS DIAGRAM FOR LOCATION OF ITEMS
DISCUSSED BELOW.
• Inspect and clean all burner ports.
• Verify burner and pilot flame pattern and log placement for proper operation.
• Verify smooth and responsive ignition of burner.
• Inspect and clean chimney.
• Inspect and clean burner air intake holes. Remove lint or particles with vacuum or brush. Failure to keep air intake holes
clean will result in sooting and poor combustion.
Turn off gas logs and allow to cool
before cleaning. Disconnect electrical
power if applicable before cleaning or
servicing.
W
ARNING
Содержание VDY24/18
Страница 29: ...32D1999 29 NOTES ...
Страница 30: ...30 32D1999 NOTES ...
Страница 31: ...32D1999 31 NOTES ...