10
ENG
ENG
FASTENING THE SMART BUTTON
REMOVING THE SMART BUTTON
REPLACING THE BATTERY
Place the MonBaby Smart Button Enclosure on the inside of
your baby’s pajamas or onesie, with the convex side facing
your baby.
Align the MonBaby Smart Button on the outside of your
baby’s pajamas with the MonBaby Smart Button Enclosure,
and press it into the enclosure so that it is fastened to the
clothing.
To remove the MonBaby Smart Button, place your hand under
your baby’s pajamas and, using your index finger, push the smart
button out through the hole in the center of the Enclosure. Be
sure to have your other hand on the MonBaby Smart Button
to collect it after you push it out, and remove the Enclosure as
well. The MonBaby Smart Button can be stored inside of the
Enclosure, and is put into standby mode automatically when not
in use.
Occasionally, you will need to replace the MonBaby Smart Button
battery. You can always check the battery level by opening the
MonBaby App and checking the top center of the Dashboard
screen. To replace the CR2032 COIN CELL BATTERY in the
MonBaby Smart Button, follow the steps below:
1
2
For best performance, fasten the MonBaby at a location
nearest to the center, between the baby’s chest and
abdomen.
instruktsiya_0008_Eng.fra.nld.deu.indd 10
14.03.2019 12:29:09
