Monark 927 X, Руководство пользователя

Страница: 10 / 20

1
2
3
Monark 927 X
10
Brake force spring adjustment
After a service where the bike has been taken apart,
partly or completely, and put together again, the
following check should be performed to be sure the
workload is adjusted according to the display.
Detach the right cover, if it not already done. Connect
power to the bike. On the display adjust WATT to
level 2 (LOAD 2). The spring should now be hanging
straight but not stretched.
If spring is too straight or too loose adjust with the
adjustment screw at the other end of the brake belt
until correct state is reached. See
Fig: Workload
s
pring, adjustment screw.
Lock the adjustment screw
and put the cover back. The bike is ready to use.
Note that 927 X is an exercise bike that can not be
calibrated. It is not for testing when the display just
shows an estimate value.
Fig: Workload spring,
adjusting screw
1) Spring
2) Snap hook
3) Adjustment screw