7
Setting the Call/Listen Mode
This option sets the connection mode to Call or Listen.
1.
From the Configure menu, select
Call/Listen
.
Call/Listen
P
P
Listen
X Call
E
D
The choices include Listen or Call. Call mode initiates the transfer of
data. Call mode can be used for TCP or Telnet protocols. Listen
mode waits for a host to connect to the specified port and receives
data. Listen mode can be used for TCP or LPD protocols.
2.
Use the
A
button under the
D
icon to select the connection mode you
want. Press the
A
button under the
E
icon to save the setting. For
example, if you select Call, you will see
Port
+ 09100
E
R
+
In Listen mode, this is the listen port.
In Call mode, this is the call port.
Use the
A
buttons as shown in the following table:
E
Press
A
to
R
Press
A
to
+
Press
A
to
Saves the setting
Scrolls through the positions
from left to right
Toggles between
+
or
–
;
also
Increments the current
position setting by 1
3.
When the setting you want is displayed, press the
A
button under the
E
icon to save the setting.
Remote IP
192.168.069.200
E
R
+
In Call mode, this is the remote IP address you are calling.
