background image

Safeguards and Precautions

1.

Read and follow all instructions in this manual carefully, and
retain this manual for future reference.

2.

Do not use this instrument in any manner inconsistent with
these operating instructions or under any conditions that
exceed the environmental specifications stated.

3.

Use of this product may induce an epileptic seizure in persons
prone to this type of attack.

4.

Objects viewed with this product may appear to be stationary
when in fact they are moving at high speeds.  Always keep a
safe distance from moving machinery and do no touch the target.

5.

There are lethal voltages present inside this product.  Refer to
the section on Lamp Replacement before attempting to open
this product.

AC Stroboscopes that have three wire mains cable must
have the earth wire connected to a suitable Earth point.

6.

Do not allow liquids or metallic objects to enter the ventilation
holes on the stroboscope as this may cause permanent
damage and void the warranty.

7.

Do not allow cables extending from unit to come into contact
with rotating machinery, as serious damage to the equipment,
or severe personal injury or death may occur as a result.

8.

This instrument may not be safe for use in certain hazardous
environments, and serious personal injury or death could occur
as a result of improper use.  Please refer to your facility’s
safety program for proper precautions.

CE DECLARATION OF CONFORMITY

As Manufacturer:

Monarch Instrument

Division of Monarch International Inc.

15 Columbia Drive, Amherst NH 03031  USA

declares under Monarch’s sole responsibility that the product:

to which this declaration relates is in conformity with the following standards:

and therefore conforms with the requirements of Council Directive 89/336/EEC
relating to electromagnetic compatibility and 93/68/EEC relating to the low voltage
directive with amendments, when operated in accordance with the user guide.
EMC testing of this product was performed by Retlif Testing Laboratories, NH, in
February of 2007 (File R-4702N-5).  Safety testing per Technical Construction File
NSXPB-0207.

Name:

Nova-Strobe X Series

Models: pbx, dbx, bbx

14

th

 February, 2007

Manufacturer  (Amherst,NH)           Alan Woolfson, VP Engineering   (Authorized Signature)

EN61326:1997 EMC

 

/A1:1998/A2:2001/A3:2003 Class A

Specifically CISPR 16-1:2003/CISPR 16-2:2003

EN55011:1998/A1:1999/A2:2002      EN61000-4-2   EN61000-4-3

EN61010-1:2001-2 

Safety Regulation

Содержание Nova-Strobe DBX















Отзывы: