11
VI. Monarch Key Functions
SELECT key
Pressing the SELECT key selects output channels in the following sequence:
CH-1 (Channel 1)
CH-2 (Channel 2)
CH-1 & CH-2 (both channels)
The selected channel blinks.
SET key
Pressing the SET key finalizes the selected item and stops the selected item from blinking.
Returns screen to selection mode if
ERR
is displayed.
Up and Down keys
These keys are for setting or changing the current amplitude (intensity) in 0.2 mA increments.
Keeping the key depressed will cause the current amplitude to increase or decrease with
the key is depressed.
The current amplitude cannot be increased while the
Monarch
is not providing stimulation (Off Cycle).
will be displayed at the top of the LCD screen during the Off Cycle.
