Monarch GC 340, Руководство пользователя

Страница: 11 / 26

Monarch GC340 / 440 Owner’s Manual. © Scooters Australia 2010
-13
. 11
3. Remove the bolt, nut, & washer that hold the seat post in the seat pedestal. See Fig 6.
4. Position the seat post at the desired height while aligning the holes in the seat post and
the seat pedestal.
5. Reinstall and tighten the nut, bolt, and washer. The bolt must be installed from the back
of the pedestal, with the nut and washer to the front of the scooter.
6. Raise the lever when placing the seat back on the seat post.
Seat Rotation Lever
The seat can be rotated through 360° and locked at any 45° position.
1. Pull up on the seat rotatation lever and rotate the seat to the desired position.
2. Release the handle to lock the seat at any 45° position.
Flip-up Armrests
Pull up on the end of either armrest to flip it up for easy transfer on & off your scooter. Fig 7.
Armrest Angle
To increase the armrest angle, turn the armrest angle screw clockwise. See Fig 4. To
decrease the armrest angle, turn the armrest angle screw counterclockwise.
Freewheel Mode
Your scooter is equipped with a freewheel lever that can set your scooter in or out of
freewheel mode. The freewheel lever engages your park brake.
To disengage the brake and put your scooter in freewheel mode:
•
Push the brake handle in the direction of “disengage” on the label. See Fig 9.
To engage the brake and take your scooter out of freewheel mode:
•
Push the brake handle in the direction of “engage” on the label. See Fig 8.
Pushing the scooter too quickly in freewheel will cause the motor to act as a generator
causing the scooter to become difficult to push. Freewheel slowly.
Armrest Adjustment
knobs
Armrest Angle
Adjustment
Figure 4.
Figure 5.
Figure 6. Figure 7.
Figure 8. Figure 9.