Monarch Ezi-Fold D10, Руководство по эксплуатации

Страница: 22 / 24

20
3.
Battery power is too low.
3.
Charge the battery.
Why is the wheelchair noisy or
vibrating when turning?
1.
Speed is set too low.
2.
Motor is damaged.
1.
Raise the speed. At low
speeds, the motor may sound or
feel strained.
2.
Replace the motor.
Why can’t i charge the battery?
1.
Charger light does not turn on.
2.
Charger light is always green.
3.
Charging time is stopped
before full charge is complete.
1.
Replace the charger.
2.
Battery is not connected or
may need to be replaced.
3.
Capacity of battery as
decrease over time. This is
normal.
Why can’t i connect the
controller?
1.
Connector pins (male) on the
controller have become bent and
misaligned with connector holes
(female) on the CPU connector.
1.
Using a small tool, carefully
straighten the connector pins
(male) on the controller to align
with holes (female) on the CPU
connector.
Diagnostics
Your controller as an indicator light that, during normal operation, is a steady GREEN. This light also
functions as a diagnostic tool by flashing in patterns that indicate problems. It is important to pay
attention to these diagnostics in case the power wheelchair must be put out of use for safety reasons
until maintenance can be performed.
If the indicator light indicates a fault, turn off the power and then turn on power again. If the fault is not
released after turning on power again, the indicator repeats this error message. Please refer to the fault
information diagnosis table to help you find possible problems and corresponding solutions.
If the above method still does not help you troubleshoot, please contact your dealer. When