16
2.
Flip open the charger port protector on the front of battery.
3.
Use the secondary charger pigtail to adapt the battery charger to plug into the battery directly.
◎
More information on the Fold Power Wheelchair D10 batteries...
1.
The Fold Power Wheelchair comes with two charged 24V 7AH lithium batteries.
2.
Charged the batteries for 3-4 hours for each battery.
3.
Turn the main unit’s power off while charging.
4.
Do not leave children unsupervised near the power wheelchair while it is charging.
5.
Do not attempt to open the battery housing.
6.
Red means the power is on and the unit is charging; green means the unit is fully charged.
Note: this information is also located on the back of the charger.
7.
when the battery is full charged, remove cable, then take out the DC charging connector and AC input
power socket.
8.
The average time taken to re-charge workable batteries will vary from 2 to 8 hours depending on the
level of usage.
9.
Do not charge more than 8 hours.
10.
If you do not operate the Ezi-Fold for two months, we recommend that you charge the battery for 6-8
hours before use.
11.
Over current protection: this system is included on the wheelchair and will shut off the current from
the batteries if triggered, thus shutting the motor down, which will ensure that the motor and battery do
not experience and damage.
Содержание Ezi-Fold D10
Страница 1: ...Fold Power Wheelchair D10 Operating Manual ...
Страница 6: ...4 Specification Diagram ...
Страница 7: ...5 ...