8.
Lift open the supply door. The supply door support
at the right-
hand rear of the printer holds the supply door open.
9.
Feed the end of the ribbon under the printhead and around the
take-up core.
10.
Stick the leading edge of the ribbon onto the take-up core.
11.
Rotate the take-up core until the ribbon leader is firmly wrapped
around the take-up core and the black portion of the ribbon is
exposed.
12.
Close the supply door by lifting the supply door slightly and
pulling the bottom of the supply door support forward towards
the front of the printer. Close the supply door slowly and make
sure it latches securely.
Note:
If you do not latch the supply door completely, poor print
quality may result.
13.
Press the ribbon window down firmly until it locks into place.
6
