2
2.
Laser On
LED
Blinks when unit is first turned on. Remains
lit when the laser beam is on.
3.
Auto/Gain
LED
On solid whenever the unit is in the Auto
mode. It also blinks from 1 to 8 times to
indicate the current gain whenever the gain
is changed.
4.
Power LED
(Dependent on the Power switch location)
On position:
GREEN when the batteries are charged.
Blinks AMBER when the batteries are low.
Charge position:
Blinks RED when fast charging for very low
batteries.
Blinks AMBER when slow charging.
Steady AMBER when the batteries are fully
charged.
5.
Polarity switch
Selects either a positive or negative output
pulse.
6.
Learn/Gain button
In Auto Mode:
Press and hold until the On Target LED
blinks regularly or is on solid.
In Manual Mode: Press to change gain ranges.
7.
Sensitivity Adjust knob
Turn fully counterclockwise to select
Auto mode or manually adjust
sensitivity threshold.
8.
Power switch
Turns unit On or Off. When the unit is
switched to Off/Charge and a charger is
plugged into the unit, the batteries will charge.
