5.4.3 INPUT
Menu
This menu sets the pulse polarity of the external signal that will
trigger the strobe. The op ons are
nEG
for nega ve edge or
POS
for posi ve edge.
Press the MENU
bu on to enter the INPUT menu. The
current edge se ng is shown on the top line with INPUT on the
lower line. The On-Target
indicator will be on for the
currently selected value.
Use the arrows on the joys ck to select the desired value.
Press the MENU bu on followed by the Power
bu on to save the value.
To exit without changing the polarity press the Power
bu on.
5.4.4
OUTP (OUTPUT) Menu
This menu sets the pulse polarity of the output signal that will
trigger a device connected to the output jack. The op ons are
nEG
for nega ve edge or
POS
for posi ve edge.
Press the MENU
bu on to enter the OUTPUT menu. The
current edge se ng is shown on the top line with OUTP on the
lower line. The On-Target
indicator will be on for the
currently selected value.
Use the arrows on the joys ck to select the desired value.
Press the MENU bu on followed by the Power
bu on to save the value.
To exit without changing the polarity press the Power
bu on.
19
5.4.5
BKLIT (Backlight) Menu
This menu op on turns the backlight of the display ON or OFF.
Press the MENU
bu on to enter the Backlight menu.
Use the arrows on the joys ck to select the desired value.
The backlight will change in real me.
Press the MENU bu on followed by the Power
bu on to save the value.
To exit without changing press the Power bu on .
5.5 Memory (MEMRY) Menu
The Memory (MEMRY) menu is used to store (save) or recall up to
10 di
ff
erent strobe se ngs. The se ngs that are saved and recalled
are the
fl
ash rate and the brightness. All other se ngs on the unit
remain the same.
Press the MENU button
to enter the MEMRY menu.
Use the right arrow
f
on the joys ck to toggle between SM (Save
Memory) or RM (Recall Memory).
5.5.1 Save
Memory
To STORE the current strobe se ng into a memory loca on:
Once in the Memory (MEMRY) menu, press the
f
arrow
on the joys ck to enter the Save Mode indicated by SM
on the display. Use the
c
and
d
arrows on the joys ck
to select one of the memory loca ons in which to save
the se ngs—SM1, SM2...SM10.
Press the MENU bu on
followed by the Power bu on
to save the current strobe se ng into the displayed
20
www.
GlobalTestSupply
.com
Find Quality Products Online at:
