16
The Brightness (BRITE) menu option sets the flash duration which
affects the brightness. Flash duration can be adjusted in degrees of
rotation (proportional flash duration—changes with flash rate) or
time in milliseconds (msec—fixed flash duration). The flash duration
will be set by the last flash duration value adjusted. If you adjusted
degrees, the strobe will have a flash duration in degrees proportional
to the flash rate. If the adjustment was in time, the strobe will have a
fixed duration irrespective of the flash rate.
This is a live adjustment—if the trigger is depressed, the effect of
changing the brightness can be seen immediately.
5.3.1 Degrees
Press the MENU button to enter the BRITE menu. The current
flash duration will be shown in degrees.
Use the arrows on the joystick to adjust the flash duration in
degrees (refer to
). Degrees can be set from 0.1° to
14°.
Press the MENU button followed by the Power button to save the
degree setting.
5.3.2 Time
To set the flash duration in time instead of degrees, press the
MENU button again (skip the DEG menu).
Use the arrows on the joystick to adjust to the time value. Time
can be set from 0.001 msec to 2.000 msec.
Press the MENU button followed by the Power button to save the
time setting.
MENU button POWER button On-Target indicator Joystick arrows
MENU button POWER button On-Target indicator Joystick arrows
