7
4.0 MODES OF OPERATION
The Nova-Pro has three modes of operation:
STROBE
,
LASER
and
TACH
(Tachometer). The mode can be changed in the Mode Menu (see
). Each are described in the sections below:
4.1 STROBE Mode
In this mode the strobe generates the flash rate from an internal
generator set by the user. The strobe will not flash until the trigger is
depressed. The strobe will output a pulse signal from the output jack
at the rate of the internal setting whether the trigger is pressed or
not. The user can set the flash rate using several methods.
4.1.1 Joystick
Pressing any button on the joystick will cause a digit on the display
to start blinking—this is the digit that will be edited. There is a
rollover effect when the digit is changed—if incrementing the
units digit 99 will roll over to 100. If the user does not increment
or decrement a digit within 5 seconds the edit mode will be
canceled.
Press
◄
or
►
to change
the digit that blinks.
Press
▲
or
▼
to increase or
decrease the value of the blinking
digit. Hold for auto increment or
decrement.
MENU button POWER button On-Target indicator Joystick arrows
