8
Figure 3 Object rotating at 3000 RPM
If doubling or halving the flash rate causes the strobe to
exceed its range, the display flash rate will remain at the
current flash value.
4.2 LASER Mode
(optional accessory)
The Laser Mode is only available when the optional Laser Module is
installed.
This mode uses the LASER to trigger the strobe flash.
Laser icon will blink when Laser Mode is enabled and be on
solid when trigger is pulled and laser is on.
By pulling the trigger and aiming the laser at a reflective target on the
rotating or reciprocating machine, the strobe will flash each time a
reflection is received allowing the user to virtually “stop motion”. On-
Target indicator will show on the display when target is detected by
laser.
The flash rate (speed) will be displayed in the selected units (see
Figure
4).
NOTE:
MENU button POWER button On-Target indicator Joystick arrows
MENU button POWER button On-Target indicator Joystick arrows
