7
English
Attaching the carrying strap
5
3 .5 mm jack AUX to connect an audio source
(e . g . CD / MP3 player for music reproduction)
The cable
C
provided can be used for con-
nection .
Note:
To avoid connection noise, switch off the
amplifier or reduce the volume before changing the
connection .
6
Clip to attach the amplifier to your clothes,
for example
7
Jack DC 9 V to connect the charger
B
8
Charging status indication for the integrated
battery
9
Power LED for the charger
red: battery is being charged
green: battery has been fully charged; dis-
connect the charger from the ampli-
fier
10
Side release buckle; squeeze the tabs on each
side of the buckle to open it
11
Push-on windshield for the hand-held mi-
crophone
E
to suppress pop noise and to
protect the microphone capsule from mois-
ture in your breath
12
ON / OFF switch of the hand-held micro-
phone; to switch on, set the switch to po-
sition ON
13
Push-on windshield for the headband
microphone
F
to suppress pop noise and
to protect the microphone capsule from
moisture in your breath
14
Supports for the microphone
F
on the head-
band
G
; to attach the microphone, push the
desired support on the headband onto the
counterpart on the microphone and direct
the microphone towards your mouth (the
support can be turned around two axes and
the gooseneck of the microphone is flexible)
4 Charging the Battery
To charge the integrated battery, connect the
charger
B
provided to the jack DC 9 V (7) and
to a mains socket (230 V/ 50 Hz) . The LEDs (8)
will indicate the charging status: 100 %, 75 %,
50 %, 25 % or 10 % . The LED (9) on the charger
will be red while the battery is being charged .
The amplifier can be switched off during charg-
ing .
When the battery has been fully charged
(the LED on the charger will be green), discon-
nect the charger from the amplifier and from
the mains . The maximum charging time is
approximately 3 hours .
Note:
When only the red LED “25 %” lights up, the bat-
tery should be recharged soon . Do not store WAP-8 with
discharged battery; this will reduce the life of the battery .
5 Specifications
Amplifier
Rated power: � � � � � � � � 4 W
Peak power: � � � � � � � � � 20 W
THD: � � � � � � � � � � � � � � � 0�3 %
Frequency range: � � � � � � � 100 – 10 000 Hz
Max� SPL: � � � � � � � � � � � � 82 dB
Power supply: � � � � � � � � � rechargeable battery
7,4 V/ 2 Ah (lithium polymer)
Charging: � � � � � � � � � � � via charger provided
and connected to
100 – 240 V/ 50 –60 Hz
Ambient temperature: � � � 0 – 40 °C
Dimensions: � � � � � � � � � � 90 × 130 × 30 mm
Weight: � � � � � � � � � � � � � � 288 g
Subject to technical modification .
All rights reserved by MONACOR
®
INTERNATIONAL GmbH & Co. KG. No part of this instruction manual may
be reproduced in any form or by any means for any commercial use.
