Monacor WALL-05DT, Инструкция по эксплуатации

Страница: 55 / 116

55
English
7.9 Loading factory settings
Use the menu item “File  Load Factory Settings” to load factory
settings . There are two different types of files:
– The factory file contains presets with the corresponding settings
and access rights .
– The flash image file (* .ffi) also contains the complete firmware,
i . e . when the function “Load Factory Settings” is used and a “* .ffi”
file is loaded, a firmware update will be made at the same time .
(Please observe the notes in chapter 7 .2 .5 .1 .)
7.10 Saving a flash image file
For backup or for transferring settings to another unit, all settings,
presets and the firmware of a unit can be saved to a flash image file:
Call up the menu item “File
 Create Flash Image” and select a file
name and a storage location . Such a file can be loaded via the menu
item “File
 Load Factory Settings” ( ☞ chapter 7 .9) .
Access Rights
Access Levels
Administrator User Locked State
Load Presets (Menu: Open, Restore Presets)
✔ ☑ ☐
Save Presets (Menu: Save, Backup Presets)
✔ ☑ ☐
Load Factory File (Factory Settings)
✔
Create Flash Image
✔
Change Access Rights for User level
✔
Change Access Rights for Locked level
✔ ☐
Change Unit Name
✔ ☐ ☐
Change Unit Configuration (Network, AutoStandby, Startup Preset)
✔ ☐ ☐
Upgrade the Unit Firmware
✔ ☐
Master Volume Control
✔ ☑ ☐
Tone Control
✔ ☑ ☐
Access Input Channel
✔
Access Output Channel
✔
= allowed
☑ / ☐
= allowed/not allowed, selectable
Fig. 16 Available access rights and their presets