11
English
4.2 Music module
Button
on the
remote control
Function
Button
on the
module
PWR
× to switch the module on / off
MODE
× ×
to select the signal source:
FM
= radio
bt
= Bluetooth receiver
USB
= USB flash drive
SD =
memory card
/
VOL– / VOL+ ×
×
to adjust the volume (
U 00
…
U 32
)
Keep the button pressed on the
module to adjust the volume.
MUTE
× to mute / unmute the sound
Radio
II
SCAN
× ×
to automatically scan for stations
and to save them to
storage locations
0, 1… 9
× to select the storage location
I
/
I
PREV / NEXT
×
× previous / next storage location
Audio player
Connect a USB flash drive to the jack USB and / or
insert a memory card (contacts facing upwards) into
the slot SD / MMC.
II
× × to pause / to continue the replay
0, 1… 9
× to select the title number
I
/
I
PREV / NEXT
×
× previous / next title
×
repeat mode
ALL
= repeat of all titles
ONE
= repeat of a single title
EQ
× to select sound presets
nor
= normal, no modification
STOP
×
to stop the replay
Bluetooth receiver
The Bluetooth receiver can be used as an alternative to
the radio mode or the audio player mode. It is used
for wireless connection to a Bluetooth audio source
(e. g. smartphone or tablet computer).
1. Press the button MODE to select
bt.
2. Activate the Bluetooth function at the Bluetooth
source. On the list of available devices, the amplifier
will appear as “UP-312B”.
3. Pair the Bluetooth source with “UP-312B” (see the
manual of the Bluetooth source, if required). The
devices will be paired automatically.
To control the replay via Bluetooth, use the Bluetooth
source or the buttons on the module or the remote
control.
Subject to technical modification .
5 Specifications
Amplifier
Power rating: � � � � � � � � � � � � � � � 30 W – PA-803DMP
60 W – PA-806DMP
120 W – PA-812DMP
THD: � � � � � � � � � � � � � � � � � � � � � < 0�5 %
Frequency range: � � � � � � � � � � � � 60 Hz – 15 kHz
Inputs
Sensitivity / impedance; connection
MIC 1: � � � � � � � � � � � � � � � � � � � � 4�5 mV/ 600 Ω; XLR bal�
MIC 2, MIC 3: � � � � � � � � � � � � � � 4�5
mV/ 600 Ω;
6�3 mm jack, unbalanced
LINE 1, LINE 2: � � � � � � � � � � � � � � 140 mV/10 kΩ;
6�3 mm jack, unbalanced
LINE 3, LINE 4: � � � � � � � � � � � � � 130 mV/ 10 kΩ;
RCA (L / R), unbalanced
TEL INPUT: � � � � � � � � � � � � � � � � 80 mV/600 Ω;
screw terminals, unbal�
S / N ratio
Microphone inputs: � � � � � � � � 72 dB
Line inputs: � � � � � � � � � � � � � � 85 dB
Phantom power supply
for MIC 1: � � � � � � � � � � � � � � � � �
⎓
48 V, switchable
Outputs
Speakers: � � � � � � � � � � � � � � � � � 4 / 8 /16 Ω, 70 / 100 V;
screw terminals
RCA jacks OUTPUT: � � � � � � � � � � mixed signal
with line level
MOH OUTPUT: � � � � � � � � � � � � � mixed signal without
MIC 1 signal,
e� g� for music on hold;
screw terminals
General
Power supply
Mains: � � � � � � � � � � � � � � � � � 230 V/ 50 Hz
Power consumption: � � � � � � 100 VA – PA-803DMP
160 VA – PA-806DMP
250 VA – PA-812DMP
DC voltage: � � � � � � � � � � � � � � 24 V
Current consumption: � � � � � 2�5 A – PA-803DMP
4�2 A – PA-806DMP
8�4 A – PA-812DMP
Ambient temperature: � � � � � � � � 0 – 40 °C
Dimensions (W × H × D): � � � � � 320 × 95 × 245 mm
Weight: � � � � � � � � � � � � � � � � � � � 3�0 kg – PA-803DMP
6�7 kg – PA-806DMP
7�8 kg – PA-812DMP
All rights reserved by MONACOR
®
INTERNATIONAL GmbH
& Co. KG. No part of this instruction manual may be
reproduced in any form or by any means for any com
mercial use.
