PASS
：
EDID PASS Button. After press the button, the PASS LED Light will go
bright; the device can auto read the sink device supported audio format and feedback it to
the source; the source will output the best audio format as the supplied info from the device
and the
Note: The EDID button only has effect at the audio format; the video format will depend on
your display video support ability. Also some special source will effect only after restart; if
you find no effect after you press the EDID button, pls restart the source and check again.
HDMI
：
ARC On/Off Button. ARC will on after press the button and ARC LED light at device will
go bright; press second time, ARC will off and the ARC LED light will off. ARC Audio will
output from the Toslink Port, Coax Port, L/R Port.(LR port only can output the audio when
ARC audio source is LPCM 2.0).
When use ARC, pls confirm you have turned on the TV CEC and used the HDMI 1.4V
Cable. If no audio out, then pls restart your equipment.
Audio:
Audio Extract Button. When you press the Extract Button, the device Extract function
will turn on and the Audio Embed function will off (the Embed Function LED Light and
Embed input audio port LED light will both off). The device will do audio extract from the
input HDMI signal and outputs it by the Toslink, Coax, L/R audio port.(L/R port only can
output audio when the input HDMI audio source is LPCM 2.0).
Embed: Audio Embed Function Button. When you press the Embed button, the Audio
Embed function of device will turn on and the Audio Extract Function will off; the Embed LED
Light and the audio embed Led light for LR, Coax and Toslink port will off. You can choose to
embed the audio to the HDMI output channel by the LR Port, Coax Port or Toslink Port.
Optical,Coax,L/R: Audio Embed Input Selection Port Button, when you press the
Optical button, it will choose the Optical Input audio and the Optical LED Light will go bright;
the same does when press the Coax or L/R button.
* Pls take out the film at the rear of the remote before you use. Pls insert the film to remote
rear if you do not use the remote for long time.
